The drum cutter precisely mills concrete, asphalt and rock — without impact or vibration, for work next to existing buildings and in populated areas. Four sizes, for machines from 1.5 to 18 tonnes.
Demolition and milling attachmentsCall: +381 64 00 80 040Choose a job and see straight away whether this attachment is designed for that type of work.
Choose a Takeuchi model. We check its operating weight against the attachment's range and, where the table lists sizes, highlight the matching variant.
The selection is based on the machine's operating weight. Final compatibility also depends on the mount, oil flow and operating pressure.
Choose a model to get a recommendation for this attachment.
The labels at the top of the table represent different models or sizes of this attachment. The rows below show the specifications of each variant.
| Specification | ER50-1 | ER100-4 | ER250-4 | ER600-2 |
|---|---|---|---|---|
| Carrier (t) | 1.5–3.0 | 3.5–8.0 | 8.0–15.0 | up to 18.0 |
| Operating weight (kg) | 200 | 330 | 570 | 900 |
| Required oil flow (l/min) | 25–38 | 41–62 | 60–85 | 120–150 |
| Number of picks | 56 | 64 | 44 | 48 |
| Rated power (kW) | 18 | 30 | 45 | 65 |
| Head width (mm) | 502 | 610 | 680 | 780 |
| Adapter plate | M03, MQ03 | M10, MQ10 | M10, MQ10, M10/M18 | M18, MQ18 |
By operating weight, the following Takeuchi models fall within this attachment's range. This is not a final confirmation of compatibility — the mount, oil flow and hydraulic pressure must be checked for the specific model.
Three more attachments for the same or a closely related application, with a similar carrier machine range.
