HUPPBreak S is a hydraulic breaker with a sound-insulated housing — the same power with quieter operation, for demolition, rock excavation and trenching in populated areas. It comes in six sizes, for machines from 1 to over 11 tonnes.
Hydraulic breakersCall: +381 64 00 80 040Choose a job and see straight away whether this attachment is designed for that type of work.
Choose a Takeuchi model. We check its operating weight against the attachment's range and, where the table lists sizes, highlight the matching variant.
The selection is based on the machine's operating weight. Final compatibility also depends on the mount, oil flow and operating pressure.
Choose a model to get a recommendation for this attachment.
The labels at the top of the table represent different models or sizes of this attachment. The rows below show the specifications of each variant.
| Specification | 10S | 20S | 40S | 60S | 110S | 160S |
|---|---|---|---|---|---|---|
| Model | 08M | 1M | 3MB | 5M | 6E | – |
| Carrier (t) | 1 | 1–2 | 2.4–4 | 5–6 | 7–11 | >11 |
| Chisel diameter (mm) | 40 | 45 | 58 | 75 | 95 | 105 |
| Weight (kg) | 85 | 125 | 250 | 400 | 585 | 940 |
| Oil flow (l/min) | 18–25 | 20–30 | 20–35 | 35–60 | 45–80 | 80–120 |
| Operating pressure (kg/cm²) | 60–130 | 70–140 | 100–150 | 100–160 | 100–160 | 140–180 |
| Impact rate (1/min) | 930–1,300 | 700–1,200 | 550–1,000 | 550–1,000 | 550–1,000 | 450–720 |
By operating weight, the following Takeuchi models fall within this attachment's range. This is not a final confirmation of compatibility — the mount, oil flow and hydraulic pressure must be checked for the specific model.
Three more attachments for the same or a closely related application, with a similar carrier machine range.
